Parts and Services for the Automation Industry
Corporate Information Technology Services

Systems Engineering/Service/Support - Thorough and Complete, Only from CITS! 

Buy a part from us or get yours repaired!  If there is no price, call for a quote, (651)442- 9044.

"Making a PURCHASE on this SITE"

6 Million Dollar Honeywell Parts Inventory Across all Honeywell Legacy/NEW Systems!

    Systems Engineering    System Programming    Systems Evaluations           Systems Training Services    Systems Migration    Systems Upgrading                     Systems Problem Solving    Systems Contract Maintenance   

CITS Honeywell Product Categories
Home Controls
Software
Timers
Timers
http://citshoneywellparts.com/shop
Category
EBI Configurations  >  Delta Upgrade Configurations

EBI Alpha/Delta 1000 Configurations

 

Under these configurations, EBI (a software System) running in a Microsoft Windows 2000/2003/2008/2012 Server PC, reports control information from a legacy system known as Alpha/Delta 1000. The DeltA 1000 has 10 channels and each of these channels is connected to motherboard assemblies which are in turn connected to the interface board connecting to the PC gateway. The system may also have L1 and F&S buses. The L1 buses can have Deltanet R70444 controllers and the F&S buses may hae FS90 motherboards. The system may also have C-bus controllers and Excel 10 controllers. This system can be quite extensive and may be quite complecated in practice.

But under the configurations that we are considering here, only delta 1000 chanels are assumed down line. The following Delta 1000 DGP's may be present at your site:

1.   S1000 DGP

2.   S12000 DGP

3.   W1020 F&S Panel

4.   FS90 connected to the D1000 Channels via an inteface Board such LB or LC or other.

5.   FS20 DGP

6.   CIM (Control Inteface Module) and many oters.

CITS can help you with all Delta 1000 family of controllers and DGP's, therir hardware, software and the engineering/progrmmaing and commissioning, (651)442-9044.

 This elaborate sysem is configured via a powerful complex of software packages and hardware configurations. This setup can be done in several different ways. Depending on your hardware a particular approach may be more suitable than any other.

It is importamt to realize that it is just not enough to take a Delta 1000 or EBI class or an Excel 5000 hardware class and then to be able to configure a complex site application. Even if you have all the documentation and engineering inforamtion, you still may have problems configuring this system. CITS does not advise configuring this system on your own.

Once the system is setup and fully operational and delivered, the system life takes on an altogether new character. Now, you have to deal with the problem of system maintenance. This is even worse than configuring the system in the first place. The biggest problem is the complexity of the site and just the sheer volume of hardware and the complex iner-relationships between different pieces of hardware that were setup in the first place. Let's give you an example:

Suppose the static pressure input is in no-response on one of the air handlers. Therefore, the fan start/stop program is not going to be able to execute the PID (It is a control algorithm, Proportional, Integral, Derivative) program to maintain static in the duct work. So you will have to replace the static sensor. Do you know where the static sensor is? I am sure it is in the system prints somewhere. But do you know where your system prints are and are they the updated ones?

 So, you see the mainenance is going to be or at least may be a problem. That is universal and you will need outside help. CITS advises a service contract of some kind or other. CITS can put a very affordable contract at your site, in short order. Just click here, The Scalaeable Contract that you CONTROL!

You are also going to need parts and mechanical services for the site. CITS can supply/repair all electronic and even mechanical parts for this system and many others.

CITS has all solutions for this type of systems, (651)442-9044.

Riaz Hussain

Automation/Fire Alarm Systems Engineering Specialist

Corporate Information Technology Services

1901 Lexington Avenue N

St Paul MN 55113

(651)442- 9044

Featured Items
Deltanet Excel Plus Controller Board
Honeywell R7044C1041 Repair Service
Used in the DeltaNet Excel Plus Automation System. Board is totally programmable Using Deltanet Pascal Language. There are many classes available on it. Check CEYETS.COM
In Stock!
CA FS90 Control Board ASSY Z REV 15
14505105-005 SN# 2G1L
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
14501690-003 S/R #8636
Delta 1000 I/O Board.
$2,495.34  $2,389.45
In Stock!
Temperature Sensor Flange Mount
TE701A1A
Temperature Sensor Flange Mount. 6 in./175 mm Wire Leads
$17.95  $12.50
In Stock!
48-2440
$24.95  $19.99
In Stock!
Deltanet Microcel Controller
R7515B9019 SR#96210200207
This Controller is used in the Deltanet Excel Plus System. It is tied to the Excel Plus Controllers via a proprietary C-NAP bus and is a programmable VAV controler unlike other Application Specific Controllers.
$1,259.39  $678.29
In Stock!
Microbridge Air Flow Tube Small
AirflowTubeSmall
Air flow Tube for Connecting the Microbridge to the air flow restrictors in an Honeywell Microcel Controller for VAV Control. Both tubes shown.
$7.95  $4.94
In Stock!
Excel Plus Controller for Building Automation
R7044E1092 SR# 5EGN Assy F Rev 6
Used in the DeltaNet Excel Plus Automation System. Board is totally programmable Using Deltanet Pascal Language. There are many classes available on it. Check CEYETS.COM
$3,499.99  $2,997.89
In Stock!
14501892-001 SR# 7641
Delta 1000 Cuurent Loop Board
$3,938.47  $2,975.09
In Stock!
XC5010C
$4,596.22  $3,586.37
In Stock!
Transmission Line Interface Board Assy W REV 4
14501710-005 SN# 8745
Transmission Line Interface Board for the FS20 DGP for use in L2 and L6 Modules. Fanning Strip not included. Order separately. Transmission Format DC 1200, 4 Wire
$1,598.34  $998.34
In Stock!
LJ FS90 Communications Board
Repair 14506344-001
Repair Information for RS485 and Display Board
In Stock!
Delta 1000 600 Baud Tone Transmission Channel Card Assy G Rev 8
Repair 14502290-001
Delta 1000 600 Baud Tone Transmission Channel Card
In Stock!
LJ FS90 Communications Board REV 4 ASSY N/A DTC 7/1/86
14506344-001 20H1
RS485 & Display
$4,994.92  $4,994.92
In Stock!
FS 90 Digital Input Board AD REV 3 ASSY B
14505118-001 SN 2887
FS90 Circuit initiating board AD
$995.20  $895.32
In Stock!
Honeywell Systems Power Supply
14503190-002
Power supply for Honeywell Systems. Tested and fully functional in native system environment.
$4,909.41  $4,619.83
In Stock!
Control Logic Module L1 FS20 DGP Delta 1000
Repair 14503202-001
Repair Information for Control Logic Module for the FS20 DGP
In Stock!
CPP
Honeywell CPP Engineering program.
$98,982.39  $788,882.74
In Stock!
FS 90 Intelligent Loop control Board AE Rev N/A Assy Z
14505132-002 S/N# 4QGU
FS 90 AE Board
$2,133.22  $1,495.22
In Stock!
Initiating Board AA REV 4
14505106-001 S/N 34VR
FS90 Circuit initiating board AA tested 100% in actual system environment with our proprietary diagnostics software.
$795.20  $695.32
In Stock!
14502256-002 SN# 8014
This is a critical circuit board in the D1K System for Start/Stop functions.
$1,889.32  $1,505.67
In Stock!
Dell OptiPlex GX100 PC-HW
Complete PC to host any of the Honeywell Graphic Building Supervisor/Graphic Central/XBS/Compact Central Systems.
$5,995.79  $4,978.21
In Stock!
Audio/Phone Select/Control SB SD SF FS90 Board REV 4 ASSY 4
14506302-002 SN 17XI
FS90 System Phone/Audio Control Board
$8,995.78  $8,779.67
In Stock!
Excel Plus Controller for Building Automation Assy N Rev 9
R7044E1043 SR# LKY1313RR
Used in the DeltaNet Excel Plus Automation System. Board is totally programmable Using Deltanet Pascal Language. There are many classes available on it. Check CEYETS.COM
$2,998.99  $2,497.89
In Stock!
14505112-002 SR#5KKE
FS90 Digital Output Board
$695.03  $595.20
In Stock!
Transmission Line Interface Board SN# 7641 Assy M Rev 12
14501710-002 SN 7641
Transmission Line Interface Board for the FS20 DGP for use in L2 and L6 Modules. Fanning Strip not included. Order separately. Board is obsolete but available. Replacement: 14501710-005 Transmission Format DC 1200, 4 Wire
$1,598.34  $998.34
In Stock!
110-1533
Dukane Relay Module
$469.26  $449.21
In Stock!
Deltanet Excel Plus CNI Daughter Board
14506838-003 SR#2TH6
Deltanet Excel Plus CNI Daughter Board. It Has the LATEST OS PROM chip and the CORRECT memory chips mounted. The board is TESTED in its native environment and is ready to install.
$4,029.88  $3,982.35
In Stock!
DellaNet Interface Board Assy H Rev N/A
Repair 14506492-007
Interface board for L1, and F & S buses.
In Stock!
Honeywell 14506471-001A Repair Service
Deltanet Excel Plus Controller Power Supply
In Stock!
14800181-002
FS90 Fire Alarm System AE Intelligent Loop Control OS Firmware Updated.
$795.45  $689.24
In Stock!
14503164-001
Power supply Single Output Regulator Repair Board 14503200 Modular Power Supply Repair Board 14503164-004 Single Out
$1,225.94  $978.21
In Stock!
FS 90 Intelligent Loop control Board AE Rev N/A Assy O
14505132-002 SN# 5975
FS 90 AE Board
$2,133.22  $1,495.22
In Stock!
14505110-001 SR 8645
Controls output circuits (i.e) horns, bells, flashers. This device is typical in FS90 systems.
$995.98  $595.20
In Stock!
Control A Board for the W1002 Module Assy H Rev 4
Honeywell 14501656-001 Repair Service
This board is used in the W1002 Module of Delta 1000 system.
In Stock!
Deltanet Microcel Controller
R7515B9019 SR#9632024285
This Controller is used in the Deltanet Excel Plus System. It is tied to the Excel Plus Controllers via a proprietary C-NAP bus and is a programmable VAV controler unlike other Application Specific Controllers.
$1,259.39  $678.29
In Stock!
CCT2195
This wall adapter is used in the Deltanet Micro/Macrocel Systems with the MPPT Interface or the MPOT hand held terminal. PLease do not use cheap imitations/replacements.
$74.89  $54.29
In Stock!
Excel Plus Controller for Building Automation
R7044E1092 SR# 5EME ASSY F Rev 6
Used in the DeltaNet Excel Plus Automation System. Board is totally programmable Using Deltanet Pascal Language. There are many classes available on it. Check CEYETS.COM
$3,499.99  $2,997.89
In Stock!
14501874-001 Assy H Rev 8
CITS 14501874-001 Repair Service
Repair Information for D1K/D2K CPA Board
In Stock!
XBS-i/Graphic Central Gateway Communications Board Rev N/A Assy S
14506406-001 SR# 2TTX
Gateway Communications Board used in Graphic Central/XBS-i Systems. Firmware sold separately. Item is in short supply!
$11,998.34  $8,998.34
In Stock!
Deltanet Microcel Controller
R7515B9019 SR#9632020253
This Controller is used in the Deltanet Excel Plus System. It is tied to the Excel Plus Controllers via a proprietary C-NAP bus and is a programmable VAV controler unlike other Application Specific Controllers.
$1,259.39  $678.29
In Stock!
FS90 CA Control Board
14505104-004 REV10 S/N #0038526
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
Delta 1000 Csssette Interface Board Assy A Rev 1
Repair 14502590-001
Delta 1000 Cassette Intrface Board.
In Stock!
LJ FS90 Communications Board REV 4 ASSY N/A DTC 7/1/86
14506344-001 SN 1D43
RS485 & Display
$4,994.92  $4,994.92
In Stock!
14503000-004 S/R# 8423
Delta 1000 Interface Board
$2,345.75  $1,998.89
Backorder
CITS CSI-588 Repair Service
Repair Information for Control Systems Controller
In Stock!
14506741-005
Portable Programming Terminal for the DeltaNet Excel Plus Systems. It is used on the MCEL subsystem of the Excel Plus System. It is an essential Diagnostic and Maintenance Device. The Corresponding Training Class is CITS1002. Check Ceyets.com.
$8,991.96
In Stock!
Initiating Board AC REV 3 Assy B
14505106-002 SR# 1C3A
Input Board
$795.20  $695.32
In Stock!
FS 90 Initiating Board AA REV N/A DC 06/01
14505106-001 S/N 02323
FS90 Circuit initiating board AA tested 100% in actual system environment with our proprietary diagnostics software.
$795.20  $695.32
In Stock!
14006096-400502 SN# 12210
Modified 14503000 D1K Interface board for the DPC System
$9,921.43  $6,889.33
In Stock!
Bus Repeater Board for Micro/Macrocel System Assy B Rev 6
14506892-001 SR#5U5P
Bus Repeater Board for the MCEL System
$595.61
In Stock!
Honeywell 14501990-001 Repair Service
Repair Information for Command Board for the W1020 DGP in the Delta 1000 system
In Stock!
LC D1000 Communications Board SR#0507 REV 4 ASSY F DTC 2002
14505122-002 SR# 0507
Delta 1000 Communications Board
$2,565.92  $1,995.87
In Stock!
COPY-1647
Repair information for Digital Output Module for the XL5000 controller XL500
In Stock!
Transmission Line Interface Board REV O Assy N/A
14501710-005 SN 7906
Transmission Line Interface Board for the FS20 DGP for use in L2 and L6 Modules. Fanning Strip not included. Order separately. Transmission Format DC 1200, 4 Wire.
$1,598.34  $998.34
In Stock!
Deltanet Microcel Controller
R7516B3011 SR#9624024089
This Controller is used in the Deltanet Excel Plus System. It is tied to the Excel Plus Controllers via a proprietary C-NAP bus and is a programmable VAV controler unlike other Application Specific Controllers. Includes integral damper motor.
$1,259.39  $678.29
In Stock!
CCT2193
Battery pack used in the Micro/Macrocel sytems for powering the MPOT. This is the genuine pack to be used for this system.
$105.17  $89.78
In Stock!
Delta 1000 600 Baud Tone Transmission Channel Card
CITS 14502298-001 Repair Service
Delta 1000 600 Baud Tone Transmission Channel Card
In Stock!
FS90  CA Control Board REV O ASSY AH DC 7/1/86
14505104-005 SN#5NWQ
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
Parts for Honeywell Automation Systems, Old & New. Extensive Repair Service of Honeywell, Johnson Controls, & Siemens Systems. Parts, Repairs, Installation Service, Systems Support, Service, or Training.
Our Information

SSL certificates


Check Our Counters!


Our contact information is  given below:

Riaz Hussain,

Automation/Fire Alarm Systems Engineering Specialist

Phone : (651)442-9044
FAX : (651)646-4279

ADDRESS:

Corporate Information Technology Services

1901 Lexington Avenue N

St Paul MN 55113

 

Send Questions and inquiries to:

rhussaine@gmail.com

Thanks for visitining!

 

Repair Tips
Valuable Information for Your Repair Needs!

 

Your item may be repairable!

 

Before you buy a new item, please call us. Your item may be repairable. The way an item is repaired at CITS, it virtually becomes a NEW ITEM and takes a new lease on life. Some companies have this idea that they need to use new items only. But the fact is that new items may not be available and moreover they may be so expensive as to be prohibitive. We can reapir your item instead or sell you a rebuilt one that will perform just as well, if not better. We can also configure the part for you right at your site. We have all tools and documenttion to do that. Even if you do not have your site database and/or others may have given up on your system, we have the tools to work with your system and we will and can help you.

 

Repair tip

 

If you want to find out if an item is repairable or not, simply put the word "Repair"in front of the part number and use it in our Site Search Box. The website will tell you if the item is repairable or not.  If the repair information comes up, the item is repairble. If the search engine finds nothing then the item is not repairable and you will need to purchase one.

In that case call (651)442-9044 and arrange for your purchase. If the item is repairable, follow the links provided to schedule your repairs.

 

 

Your System is Fully Repairable!

 

Hold on there! Before you opt for that costly upgrade, look at the options. Your system may be repairable and capable of full operation for many more years. Call CITS, (651)442-9044 for a full analysis of your system. We can send an engineer to your site to evaluate your system in short order. We can reapair just about all Honeywell systems or we can re-program/re-engineer them to your new specifications so that your system is more in line with the changed usage of the site. Call (651)442-9044 to schedule a site evaluation service. You will be pleased with the result!

CITS Emergency Response
 
We evaluate your current system right on your site and submit a complete report that spells out what your system is capable of doing, what it will take to make it do that and whether the current functionality is close to what your current needs are and whether or not you need a new system or an upgrade is in order. This detailed report can only be completed by a CITS professional. The cost of this service is a mere $1590.00 and includes all expenses. The site visit is typically a one day affair and a site person knowledgeable about the geography of the site must be available for one day.  You can schedule a site visit at any time by calling Riaz Hussain, (651)414-3096 or (651)442-9044, Mobile. You can also email the engineer, rhussain@ceyets.com. Your report will show all your options and also show a particular recommended solution that will be the most cost effective alternative. Did you find what you were looking for? No? Did you call me?  Please call me. The phone is ON 24/7/365, (651)442-9044. 
************
Your Problem Resolution is a phone call away! Call CITS Today for your problem resolution. Are you looking for a hard to find part? Need a repair job done?   Call CITS for any and all problems. Call (651)442- 9044. Call any time.
***********

CITS Repairable Parts List

This is just a partial list of most commonly repaired items and is not meant to be exhaustive. If your item is not listed, please call (651)442- 9044 for repair availability/information. All repairs prices are subject to constant change and cannot be listed. To schedule a repair, call (651)442- 9044 or click  HERE.
You can also use the System Search Box on this website to to find if a part is repairable. When the item is found, the description will state if it is repairable. If it does not, then you may have to purchase the item. Also check the Repair Tips paragraph, supra.
 

14501704- 001

 

14503168- 002

 

14501708- 002/003/005

 

14501874- 001

 

14501876- 001

 

14501880- 001/002

 

14502354- 002

 

14505128- 001/002

 

14506344- 001                                                  Continued...

 

The CITS Difference (More of them!)

 

1. When they say they are out of stock, we have them in stock.
2. When they have no stock, they still give you a price! When we have no stock, we sell for 'free'.
3. When they say their item is used, we know a lot of times it is not tested. When we say the items is used, it is tested 100% in the natural relevant system environment with our own diagnostics programs. 
4. Can they service and engineer/re-enginer your system?

5. Can they configure/install the part they are selling you?
6. Can they repair the parts they are selling you?
7. Do they have all the diagnostics/Engineering tools?
8. Can they re-create your system database?
9.  Are they recommending costly upgrades because they do not know what system you have, let alone FIX what you have?
10. Do they have all the answers?

11. Do they have to call "somebody" before they can answer your questions?
12. Are they waiting for some part to arrive from Germany or Canada?

13. Are they "sourcing" your part? Looking/surfing the WEB over and over again?
14. Do they know any workaround your problem?
15. Do they give you up front repair prices or are they preparing an "estimate"?
16. Are they able to move forward or are they just going to get "back"to you?
17. Do they give you your options in the clearest possible terms or it is just the the one word mantra, "upgrade"?
18. Are they able to configure "their own" systems to your requirements or do they  need more "time"?

19. Can they deal with your system or are they calling a "service provider" or another "expert"?

20. Are they calling "original supplier/installer" for help with your system?
21. Did they recommend calling original supplier or vendor or installer or programmer?

22. Did the original supplier supply all the software/documentation and databases for your site?

23. Is your vendor able to work with your system without any documentation or database?
24. Is your system limping along and you have to use workarounds?

CITS will free you from all these problems and many more, once and for all. CITS will get you a maintenance system that will cost you next to nothing.
CITS does not have service charges that are out of this world.
CITS wil fix it NO matter what your problem.
CITS will not call anybody.
CITS will give your current system a new LEASE on life.
CITS will not need any schematics or diagrams.
CITS will re-create your system database, if necessary.
CITS will not be "sourcing" parts for you. It will have them!
CITS wil fly out to your site, no matter where it is.
CITS can diagnose your problem, just standing there.
CITS can fix your system quickly and accurately and in short order.
CITS will rid you of the shooting in the dark style diagnostics and amateurish working with the system using the internet. CITS will rid you of the need to read all those "old wives tales" on the so-called user groups and others that worked with the system once and a long time ago. The internet and user groups will not solve your problems. CITS will.

CITS will free you from the endless searching on the internet for your problems and the agony that goes with it.

CITS takes the guess work out of the trouble-shooting business.
Call CITS today, (651)442-9044 and get to your problem resolution and end the internet searches and the endless searches for parts when you may not even know if you need the parts in the first place! Get the answers today. Set up an on-site systems evaluation visit today and get cracking on this problem that has been dragging on for months and even years. CITS can save you hundreds and thousands of dollars. You can get your system working for a fraction of the money compared to the cost of a system replacement or upgrade.


CITShoneywellparts.com
(651)442- 9044
___________________

CITS Circuit Board Repair Services

You will be sending your part to them. They will not know what to charge you since they probably have never seen the board before or know what that board does.They will then look for the schematrics or other drawings for the board and check the resisters and other components to see they are in place. If not, they will order those parts from a local electronics store and sodder them on the board. Depending on what time it takes to get the resistors and diodes and other components on the board properly attahed they will send you an estimate that will look very prefessional. When the board looks pretty good and close to all the pictures as to what it should look like or the specifications for the board if they have them, they will send it back to you. They will not be able to test them in the NATIVE system since they will not have any labs or systems runing to test them. Or they will not have have any diagnostics program to live-test the board. When the board gets to you there is only a 50/50 chance that it will work and can actually cause damage to the rest of the system and it may even smoke! Then you would be on the Net again to get your money back and there will be a whole bunch of emails going back and forth before you get your board back, let alone fixed. And if the board has firmware on it, they will most cetainly destroy it. After you get your money back and hopefully the board (now probably) unrepairable, you will start the the whole process again. Then why Don't we Use CITS Repair Services, the most advanced in the business! Send the board to CITS that has an upfront repair price, no matter what the problem with the board. Leave your firmware on the board, it will be safe. We have more copies of ALL firmware. You don't need to worry! Your board will be tested in an actual live system and with our own special diagnostics programs. No one else has those testing tools! Your repaired board will not smoke! We will give complete technical support with the board. We will configure it for you at your site for additinal charges. We wil get the board to do what it is supposed to do. We do a 72 hour burn-in of the board. When it leaves our LABS it will be rock solid. You can count on it. If it does not work we will show you what else is wrong at your site and we can hunt that down with an on-site test and checkout service. We can show you our repaired board working to prove that there are other problesm at your site and that you can always schedule a site test and checkout service before starting to send in parts for repair that actually may not need any servie or repair! If your board is functional in our labs we will charge you a testing fee of only $99.00 and return the baord to you. We will then advise you to schedule a site test and checkout service. This will, incidentally, also show that someone at your site is trying to do what we call a shoot in the dark test and checkout service and sending in parts for repair that are not the problem at all! Please let us do the right service for you. We are equipped for that. Most service providers are not equipped to do that. They can do hardware replacements only. You will not be wasting money. You will be saving money and actulay time which is even more valuable than money! We will repair the board no matter what the problem unless it is shorted or is unrepairbale, a rare occurence. We can re-program and configure any board that you send us. We know all about all the boards that we repair.

Click here to start the Simplest Repair Protocol on earth!

http://citshoneywellparts.com/shop

Riaz Hussain, Automation Systems Specialist

What's the question I didn't answer, and what's the  problem I didn't solve!

Call Me NOW (651)442-9044!

Offical Automation Parts Website of Corporate Information Technology Services

Powered by PDshop & Asp.Net
ASP.NET Shopping Cart Software