CITS Honeywell Product Categories |
Category
Your Search for Solutions...
I have the PART/SERVICE! Don't Leave Without Your Solutiuon?
When you visited this site you were lookling for a solution but did you find the solution? It was here all along! Don't leave without it.
Let me explain.
Chances are that you were looking for a 'Solution' and why? Chances are that you are working for a company and they have a product or service to deliver. Were you able to do that? How much time time did you spend looking for a your solution. Have you done this before and how much did your solution really cost? Make sure you factor in the fact that your search time, the phone calls, the emails, the missed lucnhes, gas and the cost of being without the solution for one more day and the potential cost to your customer or employer, are worth a bunch of money . Did you really help the service provider or your customer? Did you look at EBAY and found the part and did they have the documentaion and configuration information? Were they able to configure and install/service the item or did you have to call Honeywell or Johnson as the last resort? Did you call the seller for technical assistance and were they able to provide it? Did you get a part that somebody just took down from a job site and sold it untested and 'cheap'? Are they able to test it with a live program in the actual system environment? Do they have a repair facility? And most important do they have it listed really cheap but no stock and ask you to sell yours if you have one? The information listed is just for your consumption and to keep you coming to the website. They do not have it. And what do we have? We have every item/service listed here and engineering like no other including the original equipment manufacturer!
I can solve yur problem no matter how large or small and whatever your budget. Call me when everyone else says "NO..," or "May be..." or " We are going to have to ... " or they may even scratch their head. I will say "Yes" and I will not scratch my head. I will bring a solution or a workaround for you in short order. I will know what to do as soon as I put one glance at your site and system. Please do not hesitate. Call me immediately and get cracking on your solution today (651)442-9044. I can be at your site Monday morning, any Monday morning!
And if I cannot help you, I will say so Directly and will find you somebody that can and will help you. Basically, I will address your problem one way or another. And If I cannot find any help I will be wiling to invest my own time and money to FIGURE out your system and fiix it eventually. I have fixed systems that I did not know anything about. I bring in my own R & D for you and your site and your system no matter who is the vendor.
Riaz Hussain
Automation/Fire Alarm Systems Engineering Specialist
Corporate Information Technology Services
25607 N 153rd Avenue
Surprise AZ 85387
(651)442-9044
Featured Items
14506930-002 S/N 8NJ1
FS90 Card Reader board. This board has Firmware on it. Firmware
sold separately. Please, call for information,(651)442-9044.
S464A1144 3 SN 9534
Honeywell
Manual Fire Alarm Station SPST N/O
With Monitor Module
Brand new in the box
$395.87
14506344-001 REV 4 SN# 04041
FS90 RS485 and Display Board
14501810-002 SN 3C9F
Delta 1000 TTY Board.
Wheelock RSS-241575-FR
Brand new in the box
Wheelock Remote Syn Strobe
$59.95
14501656-001 SN# 7806
This board is used in the W1002 Module of Delta 1000 system.
Honeywell 14501704-001 Repair Service
Repair Information for Series 1000 DGP 10 Input Analog Input
Card
14505112-002 SN# 5KKY
FS90 Digital Output Board
14505118-001 SN FC88
FS90 Circuit initiating board AD. Brand new in the box. Assy and Rev numbers may vary.
$995.32
14506788-004 SN# 1MG1
FS90 RS232 Printer and Display Board LH
14505108-001 SN 033022
FS90 initiating Board
DCP-88/VMX SR#12-10083-21
DCP Memory Board used in the Texrt Based Honeywell Microcentral Systems.
Repair 14501704-001
Repair Information for Series 1000 DGP 10 Input Analog Input
Card
14505104-005 SN 35N3
FS90 Fire Alarm System Control Board TESTED 100% with our
own Proprietary Diagnostics Software.
14505104-005 SN# 05304
FS90 Fire Alarm System Control Board TESTED 100% with our
own Proprietary Diagnostics Software.
Ml6161B2024NEW
Honeywell Series 60 Motor for Damper or Valve Control in VAV
Applications. Brand new in the box.
$49.95
14501662-001 SN# 7627
This board is used in the W1002 module of the D1K System.
RAMP286-512 SR# 56564
Expanded memory Board for Honeywell Microcentral Automation Systems
14501708-003 SR# 7645
This board is used in the S1000 DGP in the Honeywell Delta 1000
system.
SR#7645
14506930-001 SN 9352
FS90 Card Reader board. This board has Firmware on it. Firmware
sold separately. Please, call for information,(651)442-9044.
14502576-001 SN 8041
Series 1200 DGP Circuit for Delta 1000 Systems.
14506930-001 SN 63Y8
FS90 Card Reader board. This board has Firmware on it. Firmware
sold separately. Please, call for information,(651)442-9044.
14501660-001 SN# 7710
This board is used in the W1002 module of the D1K System.
14505132-002 SN# 9CGW
FS 90 AE Board
14501710-002 SN 7632
Transmission Line Interface Board for the FS20 DGP for use in L2
and L6 Modules. Fanning Strip not included. Order separately.
Board is obsolete but available.
Replacement: 14501710-005
Transmission Format DC 1200, 4 Wire.
14506930-001 SN 9406
FS90 Card Reader board. This board has Firmware on it. Firmware sold separately. Please, call for information, (651)442-9044.
14501710-003 SN 7632
Transmission Line Interface Board for the FS20 DGP for use in L1
and L5 Modules. Fanning Strip not included. Order separately.
Board is obsolete but available.
Replacement: 14501710-004 or 001
Transmission Format DC 1200, 2 Wire
14505104-002 SN# 2CF4
FS90 Fire Alarm System Control Board TESTED 100% with our
own Proprietary Diagnostics Software.
14506930-001 SN 4Y7J
FS90 Card Reader board. This board has Firmware on it. Firmware
sold separately. Please, call for information,(651)442-9044.
R7515B9019 SR#9621024148
This Controller is used in the Deltanet Excel Plus System. It is tied to the Excel Plus Controllers via a proprietary C-NAP bus and is a programmable VAV controller unlike other Application Specific
Controllers.
14506788-004 SN# 69PF
FS90 RS232 Printer and Display Board LK
14501708-005 SN 8636
D1K/D2K Control II Board
14501706-002 SN# C176
S1000 Control board for the Series 1000 DGP in the Honeywell Delta 1000 System.
14504520-005 SN E821
Honeywell 560 DGP PROM Board with PROMS
$19,395.00
14503210-001 SR# FE10 Assy N/A Rev 7
N Module for the FS20 DGP
14800179-008
FS90 Fire Alarm System LJ OS Firmware. Updated. Installation
location Z3. Call (651)442-9044 for more information.
14502258-001 SR 3479
D1K/D2K System DGP's
14503936-003 SN 8LJK
Honeywell 560 DGP EIA Interface Board
$19,395.00
14501704-001 SN# 27641
This board is used in the S1000 DGP in the Honeywell Delta 1000 system.
CCT2190
Portable Operator Terminal for the DeltaNet Excel Plus Systems. It is an essential Diagnostic and Maintenance Device. The Corresponding Training Class is CITS1002. Check Ceyets.com. Item is shipped with the power supply and new batteries.
$3,960.22
14506344-001 REV 4 S/N 99401
FS90 RS485 and Display Board. Order PROM for the board separately, 14800179-008. Call (651)442-9044 for more information. This board requires programming or configuration.
14505132-002 SN# 595P
FS 90 AE Board
14506344-001 S/N 9CWR
RS485 & Display
14503936-003 SN 98EC
Honeywell 560 DGP EIA Interface Board
$19,395.00
14800209-004
FS90 Card Reader board PROM. The AR board is sold separately. Check the AR board 14506930-001.Please call for more information,(651)442-9044.
14501704-001 SN# E797
This board is used in the S1000 DGP in the Honeywell Delta 1000 system.
14506930-002 SN# 4Y6Q
FS90 Card Reader board. This board has Firmware on it. Firmware
sold separately. Please, call for information,(651)442-9044.
14505132-002 SN 59751
FS 90 AE Board
14503932-001 SN FE97
560 DGP Bus Interface Board
|
Our Information Our Information is given below: Riaz Hussain Phone: (651)442-9044 Thanks. C.I.T.S. Riaz Hussain, Automation/Fire Alarm Systems Engineering Specialist Phone : (651)442-9044 Email : rhussaine@gmail.com Thanks for visiting!
Repair Tips
Your item may be repairable!
Before you buy a new item, please call us. Your item may be repairable. The way an item is repaired at CITS, it virtually becomes a NEW ITEM and takes a new lease on life. Some companies have this idea that they need to use new items only. But the fact is that new items may not be available and moreover they may be so expensive as to be prohibitive. We can repair your item instead or sell you a rebuilt one that will perform just as well, if not better. We can also configure the part for you right at your site. We have all tools and documentation to do that. Even if you do not have your site database and/or others may have given up on your system, we have the tools to work with your system and we will, and can help you. Repair tip If you want to find out if an item is repairable or not, simply put the word "Repair" in front of the part number and use it in our Site Search Box. The website will tell you if the item is repairable or not. If the repair information comes up, the item is repairable. If the search engine finds nothing then the item is not repairable and you will need to purchase one. In that case call (651)442-9044 and arrange for your purchase. If the item is repairable, follow the links provided to schedule your repairs. Your System is Fully Repairable! Hold on there! Before you opt for that costly upgrade, look at the options. Your system may be repairable and capable of full operation for many more years. Call CITS, (651)442-9044 for a full analysis of your system. We can send an engineer to your site to evaluate your system in short order. We can repair just about all Honeywell systems or we can re-program/re-engineer them to your new specifications so that your system is more in line with the changed usage of the site. Call (651)442-9044 to schedule a site evaluation service. You will be pleased with the result! CITS Emergency Response We evaluate your current system right on your site and submit a complete report that spells out what your system is capable of doing, what it will take to make it do that and whether the current functionality is close to what your current needs are and whether or not you need a new system or an upgrade is in order. This detailed report can only be completed by a CITS professional. The cost of this service is a mere $2990.00 and includes all expenses. The site visit is typically a one day affair and a site person knowledgeable about the geography of the site must be available for one day. You can schedule a site visit at any time by calling Riaz Hussain, (651)278-4086 or (651)442-9044, Mobile. You can also email the engineer, rhussaine@gmail.com. Your report will show all your options and also show a particular recommended solution that will be the most cost effective alternative.
Did you find what you were looking for? No? Did you call me? Please call me. The phone is ON 24/7/365, (651)442-9044.
************ Your Problem Resolution is a phone call away! Call CITS Today for your problem resolution.
Are you looking for a hard to find part? Need a repair job done? Call CITS for any and all problems. Call (651)442- 9044. Call any time.
***********
CITS Repairable Parts List This is just a partial list of most commonly repaired items and is not meant to be exhaustive. If your item is not listed, please call (651)442- 9044 for repair availability/information. All repairs prices are subject to constant change and cannot be listed. To schedule a repair, call (651)442- 9044 or click HERE. You can also use the System Search Box on this website to to find if a part is repairable. When the item is found, the description will state if it is repairable. If it does not, then you may have to purchase the item. Also check the Repair Tips paragraph, supra.
The problem of FS90/FS90 PLus Dectectors Introduction/The Problem These systems ae now aging but still fully working and doing their assigned funcitons. However, the detectors required are getting harder and harder to come by. CITS has spent extensive research time into this problem and determined replacement sensors for all the smoke detectors required or needed by the FS90/FS90 Plus sytem. We have done extensive tests and trials and determined the whole system of replacement sensors and detectors for the FS90/FS90 plus systems. We have listed below the original part numbers as required or specified by Honeywell and the corresponding CITS replacement sensors that are available from CITS. We have tested these replacemts down to the "T" and found them 100% operational. However, we sell these replacements only with the caveat listed hereunder: CITS Non-liability for replacemnt sensors and detectors for FS90/FS90 Plus systems: The replacement sensors and detectors listed hereunder are sold under the specific non-libbility of CITS for any and all damages if any, resulting from the purchase, installationa and use of these detectors. The detectors are tested 100% but the buyer with the act of buying agrees to hold CITS harmles against any and all damages, remote or close, direct or indirect resulting from the use or abuse of these re-placement sensors. CITS assumes no legal or other liabilitiess arising from the purchase, sale or resale or use/abuse of these detectors and sensors. The customer pucahse of these sensors and use/abuse thereof shall be a clear proof that the customer has agreed to the non-libility of CITS presented above. This non-libility extends to all damages related directly or indirectly from the purchase, sale, installation and use or abuse of these sensors. The customer agrees to waive any rights to bring lawsuits for any damages whatsoever related to these sensors in any court of law and agrees to never bring any lawsuits against CITS under any circumstaces whether listed here or not, relating to these replacement sensors/detectors. The customer purchase shall be a proof of agreement to this waiver. Here is a partial list of cross references: NOTE Please click on the Honeywell Part Number and the website will bring you to the detailed information for the replacement for the Honeywell sensor/detector you clicked. Honeywell Ionization 1. TC807AXXXX 2. TC807BXXXX Photoelectric 1. TC806AXXXX 2. TC806BXXXX Thermal 1. TC808AXXXX 2. TC808BXXXX CITS is continuing to cover all other sensors for FS90/FS90 Plus systems and will be posting them here for customer use. Remember, these are tested under an actual system for all functionality in all possible scenarios. CITS |