Parts and Services for the Automation Industry
Corporate Information Technology Services

Systems Engineering/Service/Support - Thorough and Complete, Only from CITS! 

Buy a part from us or get yours repaired!  If there is no price, call for a quote, (651)442- 9044.

"Making a PURCHASE on this SITE"

6 Million Dollar Honeywell Parts Inventory Across all Honeywell Legacy/NEW Systems!

    Systems Engineering    System Programming    Systems Evaluations      Systems Training Services    Systems Migration   

Systems Upgrading   Systems Problem Solving    Systems Contract Maintenance   

Control Products
CITS Automation Links

What is Corporate Information Technology TRYING to DO?

Do You have an Emergency Right NOW? If so, please call (651)442-9044 for a speedy solution.

Is your front end failing or did it go blank?

No graphics? Fire Alarm system in alarm?

Incurring fines?

Parts not available?

Are your air handlers running efficiently?

If your ANSWER is 'Yes' to any of these thoughts, then please click here to get on your way to a Quick and Dramatic solution.

Corporate Information Technology Services

25607 N 153rd Avenue

Surprise AZ 85387

(651)442- 9044 Open 24/7- 365

Systems Contract

Maintenance Services

CITS has developed a unique contract maintenance service offering for all Fire Alarm and HVAC Automation Systems. The basic premise is this:

"The contract service is setup to maintain a system at its optimal level by providing a level and quantity of service that is necessary and is not the full avalability service, which ordinarily is not required since if the system installed was any good in the first place it would not need the full availlability service."

Translation: If a system is properly engineered, programmed and installed it would not and should not need frequent and costly repairs and maintenance visits from the provider. Therefore, a 'Needs Only" maintenance serice should be enough. This minimal but necessary serive is what CITS provides instead of a so-called full "peace of mind" insurance type contract that the providers are always looking to provide to make the most dollars! CITS has extensive experience and has found that a "Needs Only" service contract is ideal for all customers and especially for School Districts and other fixed or low budgent entities.

This unique service is a 4 part system:

1.   Your personnel or selected members thereof are first trained on the specific hardware at your site so that they can perform all necessary PM and hardware maintenance on the remote and panel devices under the guidance and support of the CITS engineers. This also allows them to communicate effectively with the CITS service personnal when necessary.

2.   We supply all the hardware and repair parts and repair services that your system will or may ever need. We guarantee availability and repair of all parts no matter who the vendor is.

3.   A CITS peron visits your site every 3 month to take care of any engineering and other non-normal problems and any additions and modifications you may need. CITS has all tools to perform these modifications and additions and can service/supply any and all complex or simple enginering right on your site to all of your front- end and remote hardware and can perfrom all database and engineering changes that you may require. Indeed CITS has the capability to re-engineer the entire job at your site and to configure application programs that even the original supplier either did not know how to provide or said that the software was not designed to provide. CITS has a workaround around every situation or problem, no matter what it is. Remember, 'They may have developed it or installed it but only CITS can make it do any and everyrhing that you need done and in the simplest and most cost- effective way'.

4.    On emergencies a CITS person shows your staff a workaround around the current problem and then shows up in person in short order to resolve your problem permanently.

This 4-point system is all at the cost of actual service cost and there are no annual or monthly 'fluffy' large sums to pay off regardless of the actual service(s) rendered or not rendered. Call CITS today to start this service for your site and say good bye to all service problems forever. Everything is done for you. We do it all and for a mere pittance. Call (651)442-9044 today and speak to Riaz Hussain. In this day and age if you have not USED CITS, you are burning your money and burning it with each day that dawns. IT IS YOUR CALL.

You can get a handle on your system TODAY! Please call me (651)442- 9044, RH

The CITS Difference

Here is what CITS engineers can do!!

He will give you the answer right then and there.

He can reconfigure and/or reprogram your system.

He can get your sytem to do what you need it to do.

He can fix your system for a life time of savings.

If you do not have the site databse, he will recreate the databse no matter how large or small your system is.

Call CITS Today, (651)442-9044, and get your system addressed in short order.

Our engineer can be there next Monday...

Thank you.

RH

http://citshoneywellparts.com/shop

Corporate Information Technology services

C.I.T.S. 

Systems Engineering/Service/Support - Thorough and Complete, Only from CITS! 

 

CITS, Corporate Information Technology services was founded in 1980. It is a small, but high tech company specializing in HVAC/Fire Alarm Systems problem resolution. We take on problems that no one else will. We solve the problems of logic, installation errors, changes/modifications required, Systems Communications problems, Systems Integrations and just about anything else you can think of.

We also have our own system of maintenance contracts that cost you next to nothing and yet addresse your service problems in the most direct fashion. Click here for the text of this revolutionary service contract and call (651)442-9044 to set one up for your site.

We are not just a service provider with some technicians that just replace hardware parts in your system and then 'reset' the system with a 'power recycle'. We actually have the means to control and program your entire hardware system to its last detail. Indeed, we can configure and reconfigure/change your entire system, if necessary. In fact, if there was some functionality that the original installer could not or did not provide, we will configure it for you in short order. If you do not have the database for your site or your installer would not provide it to you, we will actually recreate your entire database from scratch and turn it over to you. This is not the cheapest route to take but we can do it and it can be done.

We also provide extensive repair services on almost all vendor hardware, so in many cases you can save by just getting a part repaired rather than having to buy a new one. For any repairs please call (651)442-9044.

We carry a large stock of parts for all systems. We can also source the parts you are looking for. Please call (651)442-9044 to get your part sourced by a specialist.

An on site systems examination service is available. This means we will come out to your site and examine your system and provide a full report about the problems your systems is having and the possible solutions for it. This service is a one or two day service and is available for the entire world. Please click here for service details. We send out an engineer and not a technician to examine your system. This service is absolutely essential if you are trying to decide what to do with your system. This service is extremely valuable if your system has been neglected for one reason or another and now needs some repairs and rejuvenation/fixing. This serive and the report can be a great help, if you are planning some major changes to your system. This examination service can save you an enormous amount of money by first providing valuable information about the current status of your system so that you can use this information to make informed decisions about your site. CITS will provide many options to deal with your system, including one that is the most recommended one. CITS strongly recommends that you make use of this service before you make major decisions bout your site.

CITS can also handle any emergencies with your system. If you are having severe problems currently or are incurring fines due to fire alarm problems, please call (651)442-9044 for immediate service.

CITS engineers can handle systems of any size and description. Please call today, (651)442-9044. Each passing day costs you more money.

 

Riaz Hussain

Automation/Fire Alarm Systems Engineering Specialist

Corporate Information Technology Services

25607 N 153rd Ave.

Surprise AZ 85387

(651)442-9044

Featured Items
S1000 DGP  Control II Board  Assy B Rev 6
14501708-002 SN# 27645
This board is used in the S1000 DGP in the Honeywell Delta 1000 system. SR#7645
$1,912.99  $1,871.92
In Stock!
14502576-001 SN 8041
Series 1200 DGP Circuit for Delta 1000 Systems.
$2,198.93  $1,998.78
Backorder
FS90  CA Control Board REV 10 Version 021 PROM
14505104-005 SN 06315
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software. Board is updated to version 021 PROM firmware.
$2,955.24  $1,955.24
In Stock!
Delta 1000 TTY Board Assy N/A Rev 18
14501810-002 SN 97E18
Delta 1000 TTY Board.
$1,995.37
In Stock!
FS 90 Intelligent Loop control Board AE Rev N/A Assy O
14505132-002 SN 59751
FS 90 AE Board
$2,133.22  $1,495.22
In Stock!
S1000 DGP  Control II Board  Assy D Rev 6
14501708-003 SR# 17645
This board is used in the S1000 DGP in the Honeywell Delta 1000 system. SR#7645
$1,912.99  $1,671.92
In Stock!
N Module FS20 DGP Delta 1000 SR# FE10 Assy N/A Rev 7
14503210-001 SR# FE10 Assy N/A Rev 7
N Module for the FS20 DGP
$3,981.96  $3,789.27
In Stock!
Card Reader Board AR Assy  N/A Rev N/A
14506930-001 SN 4Y7J
FS90 Card Reader board. This board has Firmware on it. Firmware sold separately. Please, call for information,(651)442-9044.
$1,983.20  $997.32
In Stock!
XBS-i/Graphic Central Gateway Communications Board Rev N/A Assy S
14506406-001 SR# 61AV
Gateway Communications Board used in Graphic Central/XBS-i Systems. Firmware sold separately. Item is tested!
$8,998.34  $4,998.34
In Stock!
D1000 7 Point Analog Input Board 7A1 Assy A REV 2
14502572-001 SN 8206
Delta 1000 Point Analog Input Board
$2,565.92  $1,995.87
In Stock!
FS 90 Intelligent Loop control Board AE Rev N/A Assy O
14505132-002 SN# 5975
FS 90 AE Board
$2,133.22  $1,495.22
In Stock!
14501892-002 SN# 9622
Delta 1000 Cuurent Loop Board
$3,938.47  $2,975.09
In Stock!
14501704-001 Analog Input Board
Honeywell 14501704-001 Repair Service
Repair Information for Series 1000 DGP 10 Input Analog Input Card
$1,567.72  $1,067.72
In Stock!
CTS407B2101
Includes new base. The old Honeywell detector base cannot be used.
$198.98
In Stock!
14505104-002 SN NF90
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
Control A Board for the W1002 Module Assy H Rev 4
14501656-001 SN# 7806
This board is used in the W1002 Module of Delta 1000 system.
$1,267.72  $967.72
In Stock!
AB 4 Wire Initiating Board REV 4 DC 7/1/86
14505108-001 SN 033022
FS90 initiating Board
$1,227.35  $995.34
In Stock!
S1000 Digital Input Board Assy K Rev 9
14501702-001 SN# 8514
Digital Input Board used in the S1000 DGP in the Honeywell Delta 1000 system.
$1,859.72  $1,687.98
In Stock!
Portable Operator Terminal for XL+ Systems
W1044A1006
Portable Operator Terminal. Used in XL+ Systems as the diagnostics tool. CITS has all documentation for this device and can configure/engineer/re- engineer and program all requirements for the XL+ Controller.
$9,592.61  $8,592.61
In Stock!
DRA 1528-01
Dorado Access Control Panel used in the Delta 1000 Access Control System
$925.94  $578.21
In Stock!
CA Board Assy L Rev 6 Ver 010 PROM
14505104-002 SN 9088
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
AC FS90 Initiating Board Rev 3 Assy B
14505106-002 S/N MIT2588
The AC board initiating board monitors contact devices for alarm/trouble conditions.
$795.20  $695.32
In Stock!
CA FS90 Control Board Assy AA REV16 REV 021 PROM
14505104-005 SN# 43GY
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$2,955.24  $1,955.24
In Stock!
FS 90 Intelligent Loop control Board AE Rev N/A Assy W Ver 009 PROM
14505132-002 SN# 9CGW
FS 90 AE Board
$2,133.22  $1,495.22
In Stock!
S464A1144 3 SN 9534
Honeywell Manual Fire Alarm Station SPST N/O With Monitor Module Brand new in the box
$395.87
In Stock!
Delta 1000 CPA Board Assy G REV 6
14501874-001 S/R 7649
D1K/D2K CPA Board
$763.22  $595.00
In Stock!
14501708-005 S1000 ControlII Board Assy M Rev 12
14501708-005 SN# 7949
D1K/D2K Control II Board
$1,912.99  $1,671.92
In Stock!
S1000 DGP Analog Input Board Assy H Rev 5
14501704-001 SN# 7641
This board is used in the S1000 DGP in the Honeywell Delta 1000 system.
$1,267.72  $1,067.72
In Stock!
S1000 DGP  Control II Board  Assy M  Rev N/A
14501708-005 SN 8636
D1K/D2K Control II Board
$1,912.99  $1,671.92
In Stock!
14505116-001 SN# 8623
Controls/indicates LED inputs and outputs. Delta net FS90 fire and security system. Remote driver board.
$798.95  $587.35
In Stock!
FS90  CA Control Board Assy F REV 4 LD PROM
14505104-001 SN E417
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
LJ FS90 RS485 and Display Board REV 4 ASSY E DC 7/1/86
14506344-001 SN# 0059194
FS90 RS485 and Display Board
$2,594.92  $1,494.92
In Stock!
Card Reader Board AR
14506930-002 SN# 4Y6Q
FS90 Card Reader board. This board has Firmware on it. Firmware sold separately. Please, call for information,(651)442-9044.
$1,983.20  $697.32
In Stock!
Delta 1000 TTY Board Assy Y Rev 18
14501810-002 SN 3C9F
Delta 1000 TTY Board.
$1,995.37  $1,495.69
In Stock!
Card Reader Board AR Rev N/A Assy B
14506930-001 SN 9406
FS90 Card Reader board. This board has Firmware on it. Firmware sold separately. Please, call for information, (651)442-9044.
$1,983.20  $997.32
In Stock!
14505110-002 SN# 57MK
Controls output circuits (i.e) horns, bells, flashers. This device is typical in FS90 systems.
$1,995.98  $1,295.20
In Stock!
XBS-i/Graphic Central Gateway Communications Board Rev N/A Assy S
14506406-001 SR# 0403
Gateway Communications Board used in Graphic Central/XBS-i Systems. Firmware sold separately. Item is in short supply!
$8,998.34  $4,998.34
In Stock!
FS90  CA Control Board REV O ASSY N/A REV 021 PROM
14505104-005 SN# 79CE
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$2,655.24  $1,955.24
In Stock!
14501704-001 Analog Input Board
CITS 14501704-001 Repair Service
Repair Information for Series 1000 DGP 10 Input Analog Input Card
In Stock!
Card Reader Board AR
14506930-002 S/N 8NJ1
FS90 Card Reader board. This board has Firmware on it. Firmware sold separately. Please, call for information,(651)442-9044.
$1,983.20  $697.32
In Stock!
CTS406A2101
Includes new base. The old Honeywell detector base cannot be used.
$198.98
In Stock!
Delta 1000 Memory Card Assy D Rev 3
14505352-001 SN 8632
Delta 1000 Memory Card
$2,395.34  $2,389.45
In Stock!
XBS-i/Graphic Central Gateway Communications Board Rev N/A Assy S
14506406-001 SR# 9751
Gateway Communications Board used in Graphic Central/XBS-i Systems. Firmware sold separately.
$11,998.34  $8,998.34
In Stock!
S1000 Control Board Assy H Rev 4
14501706-002 SN 7641
S1000 Control board for the Series 1000 DGP in the Honeywell Delta 1000 System.
$1,698.34  $1,498.34
In Stock!
Delta 1000 600 Baud Tone Transmission Channel Card Assy E Rev 6
14502298-001 S/R 8241
Delta 1000 600 Baud Tone Transmission Channel Card
$645.75  $395.89
In Stock!
CA Board Assy L Rev 6 Ver 010 PROM
14505104-002 SN 9F8C
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
14503932-001 SN FE97
560 DGP Bus Interface Board
$15,890.92  $13,769.23
In Stock!
FS 90 Digital INput Board AD REV 3 ASSY B
14505118-001 SN 8745
FS90 Circuit initiating board AA
$1,590.00
In Stock!
Power Module, 120 Vac input UL listed
HWHD28CP1097FS90
Power supply for Honeywell 28 VAC controllers/systems. 120 VAC input, 28 VDC output. Do not use cheap replacements. UL listed.Picture may not be the actual Item.
In Stock!
Transmission Line Interface Board  Assy U REV 3
14501710-005 SN 4FE7
Transmission Line Interface Board for the FS20 DGP for use in L2 and L6 Modules. Fanning Strip not included. Order separately. Transmission Format DC 1200, 4 Wire
$1,598.34  $998.34
In Stock!
Parts for Honeywell Automation Systems, Old & New. Extensive Repair Service of Honeywell, Johnson Controls, & Siemens Systems. Parts, Repairs, Installation Service, Systems Support, Service, or Training.
Our Information

Our Information is given below:

Riaz Hussain

Phone: (651)442-9044

Thanks.

C.I.T.S.

Riaz Hussain,

Automation/Fire Alarm Systems Engineering Specialist

Phone : (651)442-9044
FAX : (480)639-5948

Email : rhussaine@gmail.com

Thanks for visiting!

 

CITS Emergency Response
 
We evaluate your current system right on your site and submit a complete report that spells out what your system is capable of doing, what it will take to make it do that and whether the current functionality is close to what your current needs are and whether or not you need a new system or an upgrade is in order. This detailed report can only be completed by a CITS professional. The cost of this service is a mere $2990.00 and includes all expenses. The site visit is typically a one day affair and a site person knowledgeable about the geography of the site must be available for one day.   You can schedule a site visit at any time by calling Riaz Hussain, (651)278-4086 or (651)442-9044, Mobile. You can also email the engineer, rhussaine@gmail.com. Your report will show all your options and also show a particular recommended solution that will be the most cost effective alternative.
 
Did you find what you were looking for? No? Did you call me?  Please call me. The phone is ON 24/7/365, (651)442-9044. 
************
Your Problem Resolution is a phone call away! Call CITS Today for your problem resolution.
 
Are you looking for a hard to find part? Need a repair job done?   Call CITS for any and all problems. Call (651)442- 9044. Call any time.
***********

CITS Repairable Parts List

This is just a partial list of most commonly repaired items and is not meant to be exhaustive. If your item is not listed, please call (651)442- 9044 for repair availability/information. All repairs prices are subject to constant change and cannot be listed. To schedule a repair, call (651)442- 9044 or click  HERE.
You can also use the System Search Box on this website to to find if a part is repairable. When the item is found, the description will state if it is repairable. If it does not, then you may have to purchase the item. Also check the Repair Tips paragraph, supra.
 

 14501704- 001

 14503168- 002

 14501708-002/

  003/005

 14501874- 001

UNITY Front End

 PC Complete

 

 

The problem of FS90/FS90 PLus Dectectors

Introduction/The Problem

These systems ae now aging but still fully working and doing their assigned funcitons. However, the detectors required are getting harder and harder to come by. CITS has spent extensive research time into this problem and determined replacement sensors for all the smoke detectors required or needed by the FS90/FS90 Plus sytem. We have done extensive tests and trials and determined the whole system of replacement sensors and detectors for the FS90/FS90 plus systems. We have listed below the original part numbers as required or specified by Honeywell and the corresponding CITS replacement sensors that are available from CITS. We have tested these replacemts down to the "T" and found them 100% operational. However, we sell these replacements only with the caveat listed hereunder:

CITS Non-liability for replacemnt sensors and detectors for FS90/FS90 Plus systems:

The replacement sensors and detectors listed hereunder are sold under the specific non-libbility of CITS for any and all damages if any, resulting from the purchase, installationa and use of these detectors. The detectors are tested 100% but the buyer with the act of buying agrees to hold CITS harmles against any and all damages, remote or close, direct or indirect resulting from the use or abuse of these re-placement sensors. CITS assumes no legal or other liabilitiess arising from the purchase, sale or resale or use/abuse of these detectors and sensors. The customer pucahse of these sensors and use/abuse thereof shall be a clear proof that the customer has agreed to the non-libility of CITS presented above.

This non-libility extends to all damages related directly or indirectly from the purchase, sale, installation and use or abuse of these sensors. The customer agrees to waive any rights to bring lawsuits for any damages whatsoever related to these sensors in any court of law and agrees to never bring any lawsuits against CITS under any circumstaces whether listed here or not, relating to these replacement sensors/detectors. The customer purchase shall be a proof of agreement to this waiver.

Here is a partial list of cross references:

NOTE

Please click on the Honeywell Part Number and the website will bring you to the detailed information for the replacement for the Honeywell sensor/detector you clicked.

Honeywell 

Ionization

1. TC807AXXXX

2. TC807BXXXX

Photoelectric

1. TC806AXXXX

2. TC806BXXXX

Thermal

1. TC808AXXXX

2. TC808BXXXX

CITS is continuing to cover all other sensors for FS90/FS90 Plus systems and will be posting them here for customer use. Remember, these are tested under an actual system for all functionality in all possible scenarios.

CITS

Riaz Hussain, Automation Systems Specialist

I can answer your questions and I can find/configure a solution for you!

Call Me NOW (651)442-9044!

Offical Automation Parts Website of Corporate Information Technology Services

Powered by PDshopTM