Parts and Services for the Automation Industry
Corporate Information Technology Services

Systems Engineering/Service/Support - Thorough and Complete, Only from CITS! 

Buy a part from us or get yours repaired!  If there is no price, call for a quote, (651)442- 9044.

"Making a PURCHASE on this SITE"

6 Million Dollar Honeywell Parts Inventory Across all Honeywell Legacy/NEW Systems!

    Systems Engineering    System Programming    Systems Evaluations      Systems Training Services    Systems Migration   

Systems Upgrading   Systems Problem Solving    Systems Contract Maintenance   

http://citshoneywellparts.com/shop
Category
XBS-i Configurations
Sub Categories
Deltanet Access Control
In this configuration the front end PC is connected to a network of AMC controllers that are configured for ACCESS CONTROL and Card Reader Management.

DeltaNet Fire Management System
In this system the front end PC and the gateway are connected to a network of FS90 Processors and AMC controllers. In addition there is a fire management system integrated with the Deltanet system for the use of Fire Fighters.

XBS-i FS90 Configuration
In this configuration the front end gateway PC is connected to a network of FS90 Processors.

XBS-i HVAC/Fire Configuration
In this configuration the front end gateway PC is connected to a dual network of R7044 Controllers on an L1 Bus and a network of FS90 Processors on an F&S Bus.

XBS-i L1 Bus Configuration
In this configuration the system has only L1 bus network and hence only R7044 Controllers.
Featured Items
LC D1000 Communications Board REV 4 ASSY F DTC 1986
14505122-002 SN 0LM8
Delta 1000 Communications Board.
$1,565.92  $895.87
In Stock!
14505104-002 SN NF90
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
14503936-003 SN 8LJK
Honeywell 560 DGP EIA Interface Board
$19,395.00
Backorder
N Module FS20 DGP Delta 1000 SR# FE10 Assy N/A Rev 7
14503210-001 SR# FE10 Assy N/A Rev 7
N Module for the FS20 DGP
$3,981.96  $3,789.27
In Stock!
Relay Control Board
14502012-002 SN 529659 Assy K Rev N/A
Relay control board in the Honeywell Delta 1000 System.
$8,687.50  $7,899.23
In Stock!
W1002 Printer Driver Board Assy G Rev 4
14501662-001 SN# 7627
This board is used in the W1002 module of the D1K System.
$2,301.72  $1,967.81
In Stock!
CA FS90 Control Board ASSY Q REV 7 VER 010 PROM
14505104-002 SN 18641
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
CA FS90 Control Board ASSY L REV 6 VER 010 PROM
14505104-002 SN# 2CF4
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
14505104-002 SN F279
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
14503932-001 SN FE97
560 DGP Bus Interface Board
$15,890.92  $13,769.23
In Stock!
AC FS90 Initiating Board Rev 3 Assy B
14505106-002 S/N MIT2588
The AC board initiating board monitors contact devices for alarm/trouble conditions.
$795.20  $695.32
In Stock!
S1000 DGP Analog Input Board Assy H Rev 4
14501704-001 SN# 27641
This board is used in the S1000 DGP in the Honeywell Delta 1000 system.
$1,267.72  $1,067.72
In Stock!
FS90 CA Control Board  ASSY Q Rev 7  VER 010 PROM
14505104-002 SN 8641
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,955.24  $955.24
In Stock!
LJ FS90 RS485 and Display Board ASSY N/A Rev 4
14506344-001 REV 4 S/N 99401
FS90 RS485 and Display Board. Order PROM for the board separately, 14800179-008. Call (651)442-9044 for more information. This board requires programming or configuration.
$2,594.92  $1,994.92
In Stock!
Delta 1000 Totalizer Board Assy B REV 3 NEW
14502258-001 SR 7632
D1K Totalizer Board
$997.95  $972.82
In Stock!
Station
Dell Latitude Laptop PC will be configured and loaded with Remote Station software for YOUR EBI/SymmetrE System. GREAT for maintenance and backup.
In Stock!
Transmission Line Interface Board  SN  8041 Assy na REV NA
14501710-005 SN 8041
Transmission Line Interface Board for the FS20 DGP for use in L2 and L6 Modules. Fanning Strip not included. Order separately. Transmission Format DC 1200, 4 Wire
$1,598.34  $998.34
In Stock!
DCP-88/VMX SR#12-10083-21
DCP Memory Board used in the Texrt Based Honeywell Microcentral Systems.
$639.35  $489.22
In Stock!
D1000 7 Point Analog Input Board 7A1 Assy A REV 2
14502572-001 SN 8206
Delta 1000 Point Analog Input Board
$2,565.92  $1,995.87
In Stock!
FS 90 Intelligent Loop control Board AE Rev N/A Assy O
14505132-002 SN# 595P
FS 90 AE Board
$2,133.22  $1,495.22
In Stock!
S1000 DGP  Control II Board  Assy B Rev 6
14501708-002 SN# 27645
This board is used in the S1000 DGP in the Honeywell Delta 1000 system. SR#7645
$1,912.99  $1,871.92
In Stock!
CTS406B2101
Includes new base. The old Honeywell detector base cannot be used.
$198.98
In Stock!
FS 90 Intelligent Loop control Board AE Rev N/A Assy O
14505132-002 SN 59751
FS 90 AE Board
$2,133.22  $1,495.22
In Stock!
FS90  CA Control Board REV O ASSY REV 021 PROM
14505104-005 SN# 6JVF
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$2,655.24  $1,955.24
In Stock!
14501704-001 Analog Input Board
CITS 14501704-001 Repair Service
Repair Information for Series 1000 DGP 10 Input Analog Input Card
In Stock!
LJ FS90 RS485 and Display Board Assy X Rev 4
14506344-001 SN 7NRV
FS90 RS485 and Display Board
$2,594.92
In Stock!
14502256-002 SN# 8014
This is a critical circuit board in the D1K System for Start/Stop functions.
$1,889.32  $1,505.67
In Stock!
14506788-003 SN 98245
$9,932.81  $9,679.67
In Stock!
CTS407A2101
Includes new base. The old Honeywell detector base cannot be used.
$198.98
In Stock!
CA Board Assy Q Rev 7 Ver 010 PROM
14505104-002 SN 88493
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
FS90  CA Control Board REV O ASSY N/A REV 021 PROM
14505104-005 SN# 79CE
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$2,655.24  $1,955.24
In Stock!
Delta 1000 Channel Interface Board Assy M Rev 11
14501688-001 SN 7914
Delta 1000 Channel Interface Board. SR#9CBA Available Immediately!
$1,895.37
In Stock!
XBS-i/Graphic Central Gateway Communications Board Rev N/A Assy S
14506406-001 SR# 61AV
Gateway Communications Board used in Graphic Central/XBS-i Systems. Firmware sold separately. Item is tested!
$8,998.34  $4,998.34
In Stock!
Delta 1000 TTY Board Assy N/A Rev 18
14501810-002 S/N SNUJ23
Delta 1000 TTY Board.
$1,995.37  $1,495.69
In Stock!
Card Reader Board AR Assy B Rev N/A
14506930-001 SN 9352
FS90 Card Reader board. This board has Firmware on it. Firmware sold separately. Please, call for information,(651)442-9044.
$1,983.20  $697.32
In Stock!
Card Reader Board AR
14506930-002 S/N 8NJ1
FS90 Card Reader board. This board has Firmware on it. Firmware sold separately. Please, call for information,(651)442-9044.
$1,983.20  $697.32
In Stock!
S1000 DGP  Control II Board  Assy D Rev 6
14501708-003 SR# 7645
This board is used in the S1000 DGP in the Honeywell Delta 1000 system. SR#7645
$1,912.99  $1,671.92
In Stock!
FS 90 Intelligent Loop control Board AE Rev N/A Assy O
14505132-002 SN# 5975
FS 90 AE Board
$2,133.22  $1,495.22
In Stock!
CA Board Assy L Rev 6 Ver 010 PROM
14505104-002 SN 9088
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
14505112-002 SN# 5KKY
FS90 Digital Output Board
$695.03  $595.20
In Stock!
14502356-001 SN 7B41
Used in the PCU system for the Delta 1000 System.
$1,095.00
In Stock!
XBS-i/Graphic Central Gateway Coprocessor Board Rev N/A Assy P
14506404-001 SR# 2TW8
Gateway Coprocessor Board used in Graphic Central/XBS-i Systems. Firmware sold separately. Item is in short supply!
$12,998.34  $10,998.34
In Stock!
Card Reader Board AR Assy  N/A Rev N/A
14506930-001 SN 4Y7J
FS90 Card Reader board. This board has Firmware on it. Firmware sold separately. Please, call for information,(651)442-9044.
$1,983.20  $997.32
In Stock!
14501704-001 Analog Input Board Assy H REV 5
14501704-001 SN 7649
Series 1000 DGP 10 Input Analog Input Card
$1,567.72  $1,067.72
In Stock!
DRA 1528-01
Dorado Access Control Panel used in the Delta 1000 Access Control System
$925.94  $578.21
In Stock!
CA FS90 Control Board Assy AA REV16 REV 021 PROM
14505104-005 SN# 43GY
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$2,955.24  $1,955.24
In Stock!
Transmission Line Interface Board  Assy U REV 3
14501710-005 SN 4FE7
Transmission Line Interface Board for the FS20 DGP for use in L2 and L6 Modules. Fanning Strip not included. Order separately. Transmission Format DC 1200, 4 Wire
$1,598.34  $998.34
In Stock!
Transmission Line Interface Board SN# 7641 Assy M Rev 12
14501710-002 SN 7641
Transmission Line Interface Board for the FS20 DGP for use in L2 and L6 Modules. Fanning Strip not included. Order separately. Board is obsolete but available. Replacement: 14501710-005 Transmission Format DC 1200, 4 Wire
$1,598.34  $998.34
In Stock!
CA FS90 Control Board ASSY L REV 6 VER 010 PROM
14505104-002 SN 8781
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
LJ FS90 Communications Board REV 4 ASSY X DTC 7/1/86
14506344-001 SN 9623
RS485 & Display
$2,594.92
In Stock!
Parts for Honeywell Automation Systems, Old & New. Extensive Repair Service of Honeywell, Johnson Controls, & Siemens Systems. Parts, Repairs, Installation Service, Systems Support, Service, or Training.
Our Information

Our Security Seal

Pease no WEB Development Emails!!

We are very busy, We do not need any help with web design or SEO work. We do it all ourselves. 

Our Information is given below:

Riaz Hussain

Phone: (651)442-9044

Please note that, this information is for our esteemed clients seeking sales and technical help only.

Please no irrelevant emails and and allow us to do our work. We appreciate your discipline and self control.

Thanks.

C.I.T.S.

Riaz Hussain,

Automation/Fire Alarm Systems Engineering Specialist

Phone : (651)442-9044
FAX : (480)639-5948

Thanks for visiting!

 

Repair Tips
Valuable Information for Your Repair Needs!

 

Your item may be repairable!

 

Before you buy a new item, please call us. Your item may be repairable. The way an item is repaired at CITS, it virtually becomes a NEW ITEM and takes a new lease on life. Some companies have this idea that they need to use new items only. But the fact is that new items may not be available and moreover they may be so expensive as to be prohibitive. We can repair your item instead or sell you a rebuilt one that will perform just as well, if not better. We can also configure the part for you right at your site. We have all tools and documentation to do that. Even if you do not have your site database and/or others may have given up on your system, we have the tools to work with your system and we will, and can help you.

 Repair tip

 If you want to find out if an item is repairable or not, simply put the word "Repair" in front of the part number and use it in our Site Search Box. The website will tell you if the item is repairable or not.   If the repair information comes up, the item is repairable. If the search engine finds nothing then the item is not repairable and you will need to purchase one.

In that case call (651)442-9044 and arrange for your purchase. If the item is repairable, follow the links provided to schedule your repairs.

Your System is Fully Repairable!

Hold on there! Before you opt for that costly upgrade, look at the options. Your system may be repairable and capable of full operation for many more years. Call CITS, (651)442-9044 for a full analysis of your system. We can send an engineer to your site to evaluate your system in short order. We can repair just about all Honeywell systems or we can re-program/re-engineer them to your new specifications so that your system is more in line with the changed usage of the site. Call (651)442-9044 to schedule a site evaluation service. You will be pleased with the result!

CITS Emergency Response
 
We evaluate your current system right on your site and submit a complete report that spells out what your system is capable of doing, what it will take to make it do that and whether the current functionality is close to what your current needs are and whether or not you need a new system or an upgrade is in order. This detailed report can only be completed by a CITS professional. The cost of this service is a mere $1590.00 and includes all expenses. The site visit is typically a one day affair and a site person knowledgeable about the geography of the site must be available for one day.   You can schedule a site visit at any time by calling Riaz Hussain, (651)278-4086 or (651)442-9044, Mobile. You can also email the engineer, rhussaine@gmail.com. Your report will show all your options and also show a particular recommended solution that will be the most cost effective alternative.
 
Did you find what you were looking for? No? Did you call me?  Please call me. The phone is ON 24/7/365, (651)442-9044. 
************
Your Problem Resolution is a phone call away! Call CITS Today for your problem resolution.
 
Are you looking for a hard to find part? Need a repair job done?   Call CITS for any and all problems. Call (651)442- 9044. Call any time.
***********

CITS Repairable Parts List

This is just a partial list of most commonly repaired items and is not meant to be exhaustive. If your item is not listed, please call (651)442- 9044 for repair availability/information. All repairs prices are subject to constant change and cannot be listed. To schedule a repair, call (651)442- 9044 or click  HERE.
You can also use the System Search Box on this website to to find if a part is repairable. When the item is found, the description will state if it is repairable. If it does not, then you may have to purchase the item. Also check the Repair Tips paragraph, supra.
 

 14501704- 001

 14503168- 002

 14501708-002/

  003/005

 14501874- 001

UNITY Front End

 PC Complete

 

 

The problem of FS90/FS90 PLus Dectectors

Introduction/The Problem

These systems ae now aging but still fully working and doing their assigned funcitons. However, the detectors required are getting harder and harder to come by. CITS has spent extensive research time into this problem and determined replacement sensors for all the smoke detectors required or needed by the FS90/FS90 Plus sytem. We have done extensive tests and trials and determined the whole system of replacement sensors and detectors for the FS90/FS90 plus systems. We have listed below the original part numbers as required or specified by Honeywell and the corresponding CITS replacement sensors that are available from CITS. We have tested these replacemts down to the "T" and found them 100% operational. However, we sell these replacements only with the caveat listed hereunder:

CITS Non-liability for replacemnt sensors and detectors for FS90/FS90 Plus systems:

The replacement sensors and detectors listed hereunder are sold under the specific non-libbility of CITS for any and all damages if any, resulting from the purchase, installationa and use of these detectors. The detectors are tested 100% but the buyer with the act of buying agrees to hold CITS harmles against any and all damages, remote or close, direct or indirect resulting from the use or abuse of these re-placement sensors. CITS assumes no legal or other liabilitiess arising from the purchase, sale or resale or use/abuse of these detectors and sensors. The customer pucahse of these sensors and use/abuse thereof shall be a clear proof that the customer has agreed to the non-libility of CITS presented above.

This non-libility extends to all damages related directly or indirectly from the purchase, sale, installation and use or abuse of these sensors. The customer agrees to waive any rights to bring lawsuits for any damages whatsoever related to these sensors in any court of law and agrees to never bring any lawsuits against CITS under any circumstaces whether listed here or not, relating to these replacement sensors/detectors. The customer purchase shall be a proof of agreement to this waiver.

Here is a partial list of cross references:

NOTE

Please click on the Honeywell Part Number and the website will bring you to the detailed information for the replacement for the Honeywell sensor/detector you clicked.

Honeywell 

Ionization

1. TC807AXXXX

2. TC807BXXXX

Photoelectric

1. TC806AXXXX

2. TC806BXXXX

Thermal

1. TC808AXXXX

2. TC808BXXXX

CITS is continuing to cover all other sensors for FS90/FS90 Plus systems and will be posting them here for customer use. Remember, these are tested under an actual system for all functionality in all possible scenarios.

CITS

Riaz Hussain, Automation Systems Specialist

I can answer your questions and I can find/configure a solution for you!

Call Me NOW (651)442-9044!

Offical Automation Parts Website of Corporate Information Technology Services

Powered by PDshopTM