Parts and Services for the Automation Industry
Corporate Information Technology Services

Systems Engineering/Service/Support - Thorough and Complete, Only from CITS! 

Buy a part from us or get yours repaired!  If there is no price, call for a quote, (651)442- 9044.

"Making a PURCHASE on this SITE"

6 Million Dollar Honeywell Parts Inventory Across all Honeywell Legacy/NEW Systems!

    Systems Engineering    System Programming    Systems Evaluations           Systems Training Services    Systems Migration    Systems Upgrading                     Systems Problem Solving    Systems Contract Maintenance   

http://citshoneywellparts.com/shop
Category
EBI Configurations  >  FS90/FS90 Plus Configurations

FS90/FS90 Plus Configurations

 

Under these configurations, EBI (a software System) running in a Microsoft Windows 2000/2003/2008/2012 Server PC, reports control information from a legacy system known as FS90/FS90 Plus. Ther is more than one way to configure an FS90/FS90 Plus to the the EBI system. Typicllay an RS-485 converter is used to bring the point information to the EBI front end. You will need the quick builder sofware to configure the FS90 points in the EBI system. If you also need to create graphics to display the smoke and other detectors on the front end you will need additinal programming for your EBI. The system may also have L1 and and other buses such as the bacnet buses or the E buses or all of them. The L1 buses can have Deltanet R70444 controllers on them and the F&S buses may have FS90 motherboards. The system may also have C-bus controllers and Excel 10 controllers. This system can be quite extensive and may be quite complicated in practice.

But under the configurations that we are considering here, only FS90 channels are assumed down line. The following Delta 1000 DGP's may be present at your site:

1.   FS90 panels

2.   FS90 Plus Panels

3.   ACM (Access Management controllers)

The front-end PC must have an F & S approval and must be a UL approved configuration.

CITS can help you with all FS90/FS90 Plus family of controllers and DGP's, therir hardware, software and the engineering/progrmmaing and commissioning, (651)442-9044.

This elaborate sysem is configured via a powerful complex of software packages and hardware configurations. This setup can be done in several different ways. Depending on your hardware a particular approach may be more suitable than any other.

It is importamt to realize that it is just not enough to take a Delta 1000 or EBI class or an Excel 5000 hardware class and then to be able to configure a complex site application. Even if you have all the documentation and engineering inforamtion, you still may have problems configuring this system. CITS does not advise configuring this system on your own.

Once the system is setup and fully operational and delivered, the system life takes on an altogether new character. Now, you have to deal with the problem of system maintenance. This is even worse than configuring the system in the first place. The biggest problem is the complexity of the site and just the sheer volume of hardware and the complex inter-relationships between different pieces of hardware that were setup in the first place. Let's give you an example:

Suppose a particular smoke detector is causing nuisance alarms and you need to remove it from the system. You will need the downline database of the affected FS90 and will need to change/remove the record for the affected detector and then you will need to re-program the FS90 database for the affected point in the EBI point file. You may not even have the database for the FS90 as originally programmed. Even if you do, it is not possible to change it with ease. You need special programs to change that databses.

So you see, it is not straightt forward to service this system. I am sure your site has some site documentaion but it is not easy to work through it. Is the documentation updated?

So the mainenance is going to be or at least may be a problem. That is universal and you will need outside help. CITS advises a service contract of some kind or other. CITS can put a very affordable contract at your site, in short order. Just click here, The Scalaeable Contract that you CONTROL!

You are also going to need parts and mechanical services for the site. CITS can supply/repair all electronic and even mechanical parts for this system and many others.

CITS has all solutions for this type of system, (651)442-9044.

Riaz Hussain

Automation/Fire Alarm Systems Engineering Specialist

Corporate Information Technology Services

1901 Lexington Avenue N

St Paul MN 55113

(651)442- 9044

Featured Items
FS 90 Intelligent Loop control Board AE Rev N/A Assy W Ver 009 PROM
14505132-002 SN# 9CGW
FS 90 AE Board
$2,133.22  $1,495.22
In Stock!
XBS-i/Graphic Central Gateway Communications Board Rev N/A Assy S
14506406-001 SR# 61AV
Gateway Communications Board used in Graphic Central/XBS-i Systems. Firmware sold separately. Item is tested!
$8,998.34  $4,998.34
In Stock!
Card Reader Board AR
14506930-002 SN# 4Y6Q
FS90 Card Reader board. This board has Firmware on it. Firmware sold separately. Please, call for information,(651)442-9044.
$1,983.20  $697.32
In Stock!
CA Board Assy L Rev 6 Ver 010 PROM
14505104-002 SN# 9F8C
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
CA FS90 Control Board ASSY Q REV 7 VER 010 PROM
14505104-002 SN# 18641
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
CTS406B2101
Includes new base. The old Honeywell detector base cannot be used.
$198.98
In Stock!
CA FS90 Control Board Assy AA REV16 REV 021 PROM
14505104-005 SN# 43GY
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$2,955.24  $1,955.24
In Stock!
LJ FS90 RS485 and Display Board
14506344-001 REV 4 SN# 04041
FS90 RS485 and Display Board
$2,594.92  $2,494.92
In Stock!
CA FS90 Control Board ASSY L REV 6 VER 010 PROM
14505104-002 SN# 2CF4
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
FS 90 Intelligent Loop control Board AE Rev N/A Assy O
14505132-002 SN# 59751
FS 90 AE Board
$2,133.22  $1,495.22
In Stock!
FS 90 Intelligent Loop control Board AE Rev N/A Assy Z
14505132-002 S/N# 4QGU
FS 90 AE Board
$2,133.22  $1,495.22
In Stock!
CA Board Assy L Rev 6 Ver 010 PROM
14505104-002 SN# 9088
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
14505116-001 SN# 8623
Controls/indicates LED inputs and outputs. Delta net FS90 fire and security system. Remote driver board.
$798.95  $587.35
In Stock!
CTS406A2101
Includes new base. The old Honeywell detector base cannot be used.
$198.98
In Stock!
FS90  CA Control Board REV O ASSY REV 021 PROM
14505104-005 SN# 6JVF
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$2,655.24  $1,955.24
In Stock!
14505112-002 SN# 5KKY
FS90 Digital Output Board
$695.03  $595.20
In Stock!
14506788-004 SN# 69PF
FS90 RS232 Printer and Display Board LK
$9,932.81  $9,679.67
In Stock!
CA Board Assy L Rev 6 Ver 010 PROM
14505104-002 SN# 1E7C
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
FS90 CA Control Board Assy AD Rev 0 Ver 010 PROM
14505104-005 SN# 7A3K
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
LJ FS90 RS485 and Display Board REV 4 ASSY E DC 7/1/86
14506344-001 SN# 0059194
FS90 RS485 and Display Board
$2,594.92  $1,494.92
In Stock!
FS90  CA Control Board REV 10 Version 021 PROM
14505104-005 SN# 06315
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software. Board is updated to version 021 PROM firmware.
$2,955.24  $1,955.24
In Stock!
14800179-009
FS90 Fire Alarm System LJ OS Firmware. Updated.Installation location Z3.
$795.45  $489.24
In Stock!
FS 90 Intelligent Loop control Board AE Rev N/A Assy O
14505132-002 SN# 595P
FS 90 AE Board
$2,133.22  $1,495.22
In Stock!
FS90  CA Control Board REV O ASSY N/A REV 021 PROM
14505104-005 SN# 053042
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$2,655.24  $1,955.24
In Stock!
CTS407B2101
Includes new base. The old Honeywell detector base cannot be used.
$198.98
In Stock!
D1000 Totalizer Board Assy G REV 5
14502258-001 SR#3479
D1K/D2K System DGP's
$997.95  $672.82
In Stock!
14506788-004 SN# 1MG1
FS90 RS232 Printer and Display Board LH
$9,932.81  $9,679.67
In Stock!
Transmission Line Interface Board Assy N Rev 13
14501710-002 SN# 7632
Transmission Line Interface Board for the FS20 DGP for use in L2 and L6 Modules. Fanning Strip not included. Order separately. Board is obsolete but available. Replacement: 14501710-005 Transmission Format DC 1200, 4 Wire.
$1,598.34  $998.34
In Stock!
Deltanet Microcel Controller
R7515B9019 SR#9621024148
This Controller is used in the Deltanet Excel Plus System. It is tied to the Excel Plus Controllers via a proprietary C-NAP bus and is a programmable VAV controller unlike other Application Specific Controllers.
$1,259.39  $678.29
In Stock!
14800179-008
FS90 Fire Alarm System LJ OS Firmware. Updated. Installation location Z3. Call (651)442-9044 for more information.
$795.45  $489.24
In Stock!
AC FS90 Initiating Board Rev 3 Assy B
14505106-002 S/N MIT2588
The AC board initiating board monitors contact devices for alarm/trouble conditions.
$795.20  $695.32
In Stock!
CA Board Assy L Rev 6 Ver 010 PROM
14505104-002 SN# 7E2A
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
W1002 Printer Driver Board Assy G Rev 4
14501662-001 SN# 7627
This board is used in the W1002 module of the D1K System.
$2,301.72  $1,967.81
In Stock!
FS 90 Intelligent Loop control Board AE Rev 6 Assy E NEW
14505132-001 SN# 002468
FS 90 AE Board
$2,133.22  $1,995.22
In Stock!
14505110-002 SN# 57MK
Controls output circuits (i.e) horns, bells, flashers. This device is typical in FS90 systems.
$1,995.98  $1,295.20
In Stock!
FS90 CA Control Board Assy T Rev 10 Ver 010 PROM
14505104-004 SN# 0048077
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
FS90  CA Control Board REV O ASSY REV 021 PROM
14505104-005 SN# 5NWQ
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$2,655.24  $1,955.24
In Stock!
FS90 CA Control Board  ASSY Q Rev 7  VER 010 PROM
14505104-002 SN# 8641
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,955.24  $955.24
In Stock!
FS90  CA Control Board REV O ASSY REV 021 PROM
14505104-005 SN# 8JWU
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$2,655.24  $1,955.24
In Stock!
CTS407A2101
Includes new base. The old Honeywell detector base cannot be used.
$198.98
In Stock!
FS90  CA Control Board REV O ASSY REV 021 PROM
14505104-005 SN# 05304
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$2,655.24  $1,955.24
In Stock!
FS 90 Intelligent Loop control Board AE Rev N/A Assy O
14505132-002 SN# 5975
FS 90 AE Board
$2,133.22  $1,495.22
In Stock!
LJ FS90 RS485 and Display Board ASSY N/A Rev 4
14506344-001 REV 4 S/N 99401
FS90 RS485 and Display Board. Order PROM for the board separately, 14800179-008. Call (651)442-9044 for more information. This board requires programming or configuration.
$2,594.92  $1,994.92
In Stock!
CA FS90 Control Board ASSY L REV 6 VER 010 PROM
14505104-002 SN# 3749
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
CA Board Assy Q Rev 7 Ver 010 PROM
14505104-002 SN# 88493
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
CA FS90 Control Board ASSY L REV 6 VER 010 PROM
14505104-002 SN# 8781
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$1,655.24  $955.24
In Stock!
Card Reader Board AR
14506930-002 S/N 8NJ1
FS90 Card Reader board. This board has Firmware on it. Firmware sold separately. Please, call for information,(651)442-9044.
$1,983.20  $697.32
In Stock!
LJ FS90 RS485 and Display Board
14506344-001 REV 4 S/N 69C3
FS90 RS485 and Display Board
$2,594.92  $2,494.92
In Stock!
CTS408B2101
Includes new base. The old Honeywell detector base cannot be used.
$198.98
In Stock!
FS90  CA Control Board REV O ASSY N/A REV 021 PROM
14505104-005 SN# 79CE
FS90 Fire Alarm System Control Board TESTED 100% with our own Proprietary Diagnostics Software.
$2,655.24  $1,955.24
In Stock!
Parts for Honeywell Automation Systems, Old & New. Extensive Repair Service of Honeywell, Johnson Controls, & Siemens Systems. Parts, Repairs, Installation Service, Systems Support, Service, or Training.
Our Information

 

 

Our Information is given below:

Riaz Hussain

Email: rhussaine@gmail.com

Phone: (651)442-9044

Please note that, this information is for our esteemed clients seeking sales and technical help only.

Please no irrelevant emails and and allow us to do our work. We appreciate your discipline and self control.

Thanks.

C.I.T.S.

Riaz Hussain,

Automation/Fire Alarm Systems Engineering Specialist

Phone : (651)442-9044
FAX : (480)639-5948

Email : rhussaine@gmail.com

Thanks for visiting!

 

Repair Tips
Valuable Information for Your Repair Needs!

 

Your item may be repairable!

 

Before you buy a new item, please call us. Your item may be repairable. The way an item is repaired at CITS, it virtually becomes a NEW ITEM and takes a new lease on life. Some companies have this idea that they need to use new items only. But the fact is that new items may not be available and moreover they may be so expensive as to be prohibitive. We can repair your item instead or sell you a rebuilt one that will perform just as well, if not better. We can also configure the part for you right at your site. We have all tools and documentation to do that. Even if you do not have your site database and/or others may have given up on your system, we have the tools to work with your system and we will, and can help you.

 Repair tip

 If you want to find out if an item is repairable or not, simply put the word "Repair" in front of the part number and use it in our Site Search Box. The website will tell you if the item is repairable or not.   If the repair information comes up, the item is repairable. If the search engine finds nothing then the item is not repairable and you will need to purchase one.

In that case call (651)442-9044 and arrange for your purchase. If the item is repairable, follow the links provided to schedule your repairs.

Your System is Fully Repairable!

Hold on there! Before you opt for that costly upgrade, look at the options. Your system may be repairable and capable of full operation for many more years. Call CITS, (651)442-9044 for a full analysis of your system. We can send an engineer to your site to evaluate your system in short order. We can repair just about all Honeywell systems or we can re-program/re-engineer them to your new specifications so that your system is more in line with the changed usage of the site. Call (651)442-9044 to schedule a site evaluation service. You will be pleased with the result!

CITS Emergency Response
 
We evaluate your current system right on your site and submit a complete report that spells out what your system is capable of doing, what it will take to make it do that and whether the current functionality is close to what your current needs are and whether or not you need a new system or an upgrade is in order. This detailed report can only be completed by a CITS professional. The cost of this service is a mere $1590.00 and includes all expenses. The site visit is typically a one day affair and a site person knowledgeable about the geography of the site must be available for one day.   You can schedule a site visit at any time by calling Riaz Hussain, (651)278-4086 or (651)442-9044, Mobile. You can also email the engineer, rhussaine@gmail.com. Your report will show all your options and also show a particular recommended solution that will be the most cost effective alternative.
 
Did you find what you were looking for? No? Did you call me?  Please call me. The phone is ON 24/7/365, (651)442-9044. 
************
Your Problem Resolution is a phone call away! Call CITS Today for your problem resolution.
 
Are you looking for a hard to find part? Need a repair job done?   Call CITS for any and all problems. Call (651)442- 9044. Call any time.
***********

CITS Repairable Parts List

This is just a partial list of most commonly repaired items and is not meant to be exhaustive. If your item is not listed, please call (651)442- 9044 for repair availability/information. All repairs prices are subject to constant change and cannot be listed. To schedule a repair, call (651)442- 9044 or click  HERE.
You can also use the System Search Box on this website to to find if a part is repairable. When the item is found, the description will state if it is repairable. If it does not, then you may have to purchase the item. Also check the Repair Tips paragraph, supra.
 

 14501704- 001

 14503168- 002

 14501708-002/

  003/005

 14501874- 001

UNITY Front End

 PC Complete

 

 

The problem of FS90/FS90 PLus Dectectors

Introduction/The Problem

These systems ae now aging but still fully working and doing their assigned funcitons. However, the detectors required are getting harder and harder to come by. CITS has spent extensive research time into this problem and determined replacement sensors for all the smoke detectors required or needed by the FS90/FS90 Plus sytem. We have done extensive tests and trials and determined the whole system of replacement sensors and detectors for the FS90/FS90 plus systems. We have listed below the original part numbers as required or specified by Honeywell and the corresponding CITS replacement sensors that are available from CITS. We have tested these replacemts down to the "T" and found them 100% operational. However, we sell these replacements only with the caveat listed hereunder:

CITS Non-liability for replacemnt sensors and detectors for FS90/FS90 Plus systems:

The replacement sensors and detectors listed hereunder are sold under the specific non-libbility of CITS for any and all damages if any, resulting from the purchase, installationa and use of these detectors. The detectors are tested 100% but the buyer with the act of buying agrees to hold CITS harmles against any and all damages, remote or close, direct or indirect resulting from the use or abuse of these re-placement sensors. CITS assumes no legal or other liabilitiess arising from the purchase, sale or resale or use/abuse of these detectors and sensors. The customer pucahse of these sensors and use/abuse thereof shall be a clear proof that the customer has agreed to the non-libility of CITS presented above.

This non-libility extends to all damages related directly or indirectly from the purchase, sale, installation and use or abuse of these sensors. The customer agrees to waive any rights to bring lawsuits for any damages whatsoever related to these sensors in any court of law and agrees to never bring any lawsuits against CITS under any circumstaces whether listed here or not, relating to these replacement sensors/detectors. The customer purchase shall be a proof of agreement to this waiver.

Here is a partial list of cross references:

NOTE

Please click on the Honeywell Part Number and the website will bring you to the detailed information for the replacement for the Honeywell sensor/detector you clicked.

Honeywell 

Ionization

1. TC807AXXXX

2. TC807BXXXX

Photoelectric

1. TC806AXXXX

2. TC806BXXXX

Thermal

1. TC808AXXXX

2. TC808BXXXX

CITS is continuing to cover all other sensors for FS90/FS90 Plus systems and will be posting them here for customer use. Remember, these are tested under an actual system for all functionality in all possible scenarios.

CITS

Riaz Hussain, Automation Systems Specialist

I can answer your questions and I can find/configure a solution for you!

Call Me NOW (651)442-9044!

Offical Automation Parts Website of Corporate Information Technology Services

Powered by PDshopTM